Of heel veel duurder. Dit komt uit de FB groep voor VFR1200.
We can do 187 -192 hp on the rear wheel and about 135-138 Nm maximum torque. Standard engines have 146-152 hp on the rear wheel and about 114-117 Nm maximum torque
What everything must be made from us for this performance?
Motor disassemble completely
Liners bore out to 82,15 mm and new coating (standard the liners have no coating!)
New 82 mm piston with 13:1 compression
New forged rods (made of steel or titanium)
Crankshaft reworked, balanced and plasma-nitrided
Gearbox undercutting 'up' and 'down'
Option: Gearbox superfinished
Cylinderhead tuning incl. porting, rework of all combustion chamber, set valve guides deeper (the new cams have about 2 mm more lift)
New valve springs plus titanium retainer, totally new cams made of steel
Note -the links are for illustrative purposes only
Stainless steel exhaust tubes, handmade
Akrapovic muffler (works perfect as street legal version also with 204 hp on rear wheel!)
Powercommander V with map switch (position 1/full power, position 2/low emission, street legal // our TÜV solution/version for Germany/Austria and Switzerland) and two separately fuel maps for the front and rear cylinder bench.
With forged steel rods we are in a range of Euro 19.000.- and with forged Titanium rods at Euro 21.500.-
Both prices are without our 19% VAT and transport costs of the engine.
If you like to get the 200 hp tuning + we must use in addition new forged valves, different valve springs and too different made from steel cams.
Extra costs are at 3.000.-
Öhlins: you will find the prices for that parts here:
Industriegebiet "Hinter den Bergen"
Tel: +49-6205-2877-53 und 54
Von: peter bigum [mailto:email@example.com]
Gesendet: Montag, 2. Januar 2017 23:03
An: Herbert Kainzinger <firstname.lastname@example.org>
Betreff: VFR 1200 tuning
Hello my name is Peter Bigum and I live in Denmark.
I would like to now the price off 200 hp tuning + Ohlins. At the moment I have powercomander and akrapowitz.
And I need to now the cost and how long time you need my VFR I your facilities for the operation.
And when do you have time to do the job, Looking forward to hear from you.